ArcelorMittal
Download Center

General Conditions of use

This software facilitates the preliminary engineering studies with respect to steel constructions. Based on calculation methods complying with the principles of the applied standards, this software enables to make a certain number of verifications in view of evaluating a solution for a pre-design. It does not enable to analyse all situations and to make in an exhaustive way all relevant calculations needed for a study of execution which requires in every case the advice of an external Engineering Office.

Given the complexity of the calculation methods, this software is only intended for professional users active in the sector of steel constructions (who are fully aware of the possibilities, limits and its adequacy thereof for specific practical cases). The user shall use the software under his own responsibility and at his own risks.

This software may be used free of charge. No right is granted to the user of the software, the property and intellectual rights of which continue to belong exclusively to ArcelorMittal Commercial Sections S.A. (or, depending on the case, to the company of the ArcelorMittal Group who is owner of these rights). No warranty is granted to the user. ArcelorMittal Commercial Sections S.A. and/or any other subsidiaries of the ArcelorMittal Group cannot be held liable for any loss or damage directly and/or indirectly sustained as a result of the use of the software. The user undertakes to hold ArcelorMittal Commercial Sections S.A. free and harmless from any claim and any direct, indirect and/or consequential damages, in particular those resulting from an incorrect or inappropriate use or a use made for an inadequate or inappropriate purpose of the software.

All the preliminary design notes done by our company and/or by any other subsidiaries of the ARCELORMITTAL group of our choice are based on the information received from the Customer. These preliminary design notes are given for guidance only. As such, they do not commit our company and/or any other subsidiary of the ARCELORMITTAL group to the achievement of a result expected by the Customer and/or any third person. These preliminary design notes cannot replace all the preliminary design notes which shall be done by an external engineering office chosen by the Customer. Our company and/or any other subsidiary of the ARCELORMITTAL group cannot be held liable for any loss or damage, directly or indirectly sustained as a result of the use of the preliminary design notes done by our company and by any other subsidiaries of the ARCELORMITTAL group, whatever the origin of the damage.