Practical guide for connections made of jumbo and superjumbo steel shapes

Economics of Steel framed buildings in Europe (ESE)

The objective of the project is to provide practitioners with a web-based tool to enable them to develop cost-effective design solutions for steel-framed buildings and to enable economic comparisons to be made. It is achieved by providing guidance to designers on the parameters that affect building cost, as well as the tool to calculate the aggregate costs. The tool can also support designers in convincing decision makers and investors to work with steel in commercial, industrial and residential sectors. It leads to a greater understanding of the economics of steel construction in buildings.

Final report EUR 25124

 

You can download below User’s Manual of software and documentation on Exemplar buildings in 4 languages: English, French, Dutch and Polish:

Getting started
Technical Notes
Exemplar buildings
Strategies

Software ACE (Cost estimation for Steel Structures) available in “Design software”.

Human induced vibration of steel structures

The objective of this project is the dissemination of knowledge gained in two European research projects. The two research projects deal both with human induced vibration of Steel Structures, a design problem that becomes more and more relevant as structures are more slender if high strength steels are applied.
For the dissemination the conclusions of the research projects - draft guidelines for vibration design of floors and footbridges - will be merged into one guideline and a accompanying background document for vibration design. The resulting guideline would be the first European guideline for vibration design of structures.

Final report EUR 24184

 

Guidelines and Background Documentation in 5 Languages (EN, FR, DE, NL, PT) from http://www.stb.rwth-aachen.de/projekte/2007/HIVOSS/download.php and consult also our brochure "Design guide for floor vibrations"

"PrECO-Beam" Prefabricated Enduring Composite Beams based on Innovative Shear Transmission

Composite structures are gaining in importance in Europe. The combination of materials within its specific properties results in very slender and economic constructions. Composite girders permit large spans in slender frame bridges without loss of economy. Due to the high grade of prefabrication in building construction smaller survey heights and shorter construction times are possible. The enduring bearing capacity of composite girders depends on the performance of material and the design of shear connection. A new form of shear transmission - the concrete dowel - permits composite girders without an upper steel flange and an enduring shear connection also of high strength steel with high strength concrete. see more

"Robustness" Robust structures by joint ductility

Final report EUR 23611

"PRECIOUS" Prefabricated composite beam-to concrete filled tube or partially reinforced-concrete-encased column connections for severe seismic and fire loadings

The project has analysed, from both an analytical/numerical and an experimental standpoint, the scenario in which a fire follows an earthquake, thus defining joint typologies for which, after being damaged by an earthquake, a residual load-bearing capacity is assured during a fire occurring after an earthquake. The design has been performed in the modern context of performance-based engineering. Both interior and exterior joints with partially reinforced-concrete encased columns, i.e. type 1 joints, have been designed to be semi-rigid and partial strength, and to exhibit high ductility and limited strength deterioration under severe seismic loadings

Final report EUR 23750

"COSIMB" Composite Column and Wall Systems for Impact and Blast Resistance

Based on the experimental and analytical findings, design approaches are proposed at two distinct levels, one for advanced application and another which is more suited to idealised engineering treatments. Overall, this research substantiates the favourable and synergetic capabilities of composite members in resisting extreme loads, and puts forward verified approaches for their application in practice.

Final report EUR 23738

"INPREST" Integrated Pre-fabricated Steel Technologies for the Multi-Storey Sector

Modern steel buildings require a high degree of pre-fabrication and effective integration of key components. The concept of open building systems in steel is developed with a focus on the multi-storey residential sector. The research will lead to the development of new systems involving skeletal, planar and modular components, including supporting design information.

Final report EUR 23860

Lateral Torsional Buckling in Steel and Composite Beams

Final report EUR 20888

Use of High Strength Steel S460

Final report EUR 20104

Modelling and Predesign of Steel and Composite Structures

Nowadays in engineering offices usual pre-design is still often based on the allowable stress method instead of the more efficient limit states method prescribed by Eurocodes 3 and 4. In order to satisfy the needs of engineering offices, the intention of this research project was : - to develop guidance on the basis of Eurocodes for structural modelling, for global analysis, for checks of members, etc.; - to prepare practical tools (software in particular) for pre-design of steel structures and composite steel-concrete structures according to Eurocodes 1, 3 and 4 respectively, in function of different decisive parameters: the type of rigidity allocated to the structure (i.e. rigid or sway buildings), the type of joints, etc.

Final report EUR 20323

Partial Safety Factors for Resistance of Steel Elements to EC3 and EC4

The first objective (γMO) is addressed by measurement campaigns in steel mills for hot-rolled product characteristics (dimensions and yield strength). Those measured values are used to compute resistances, wich are compared with resistances resulting from the nominal values. A statistical analysis of deviations results in safety factors. The results are quite satisfactory, a value of 1.0 being justified.

Final Report EUR 20344

Design Handbook for Braced Composite Steel-Concrete Buildings according to Eurocode 4

The present publication is intended to be a design aid in supplement to the complete document Eurocode 4 - Part 1.1 (always with references to it) in order to provide simplified guidance and to facilitate the use of Eurocode 4 for the design of such composite steel-concrete structures which are usual in common practice: braced composite steel-concrete structures. As this handbook is less formal and more user-friendly than Eurocode 4 additional information have been introduced to offer explanations on design principles or application rules and, about usual design results. 

Therefore, the “Design handbook according to Eurocode 4 for braced composite steel-concrete buildings” presents the main design formulas and rules extracted from Eurocode 4 - Part 1.1, which are needed to deal with:

• elastic global analysis of buildings and similar structures,
• checks of structural members at limit states, in case of braced structures, according to the European standard Eurocode 4 - Part 1.1 (ENV 1994-1-1:1992).

Publication ECCS N° 96, (also available in DE, ES, FR, IT& NL)

Design Handbook for Braced or Non-Sway Steel Buildings according to Eurocode 3

The present publication is intended to be a design aid in supplement to the complete document Eurocode 3 - Part 1.1 in order to facilitate the use of Eurocode 3 for the design of such steel structures which are usual in common practice braced or non-sway steel structures. 

Therefore the “Design handbook according to Eurocode 3 for braced or non-sway steel buildings” presents the main design formulas and rules extracted from Eurocode 3 - Part 1.1, which are needed to deal with:

• elastic global analysis of buildings and similar structures in steel, checks of structural members and connections at limit suites, in case of braced or non-sway structures, 
• according to the europcan standard Eurocode 3 - Part 1.1 (ENV 1993-1-1).

Publication ECCS N° 85, (also available in DE, ES, FR, IT& NL)

Promotion of plastic design for steel and composite cross-sections

new required conditions in Eurocodes 3 and 4, practical tools for designers (Rotation capacities of profiles…)
Ductility of plastic hinges in steel structures - Guide for plastic analysis; Annexe of the Final Report

Final Report EUR 18336

Improved classification of steel and composite cross-sections

New rules for local buckling in Eurocodes 3 and 4

Final Report EUR 18404

Elasto-Plastic Behaviour of Steel Frame Works

Final Report EUR 15627

Seismic Resistance of Composite Structures, SRCS

Final Report EUR 14428

Semi-Rigid Action in Steel Frames Structures

Final Report EUR 14427

Interaction Diagrams between Axial Load N  and Bending Moment M for Columns submitted to Buckling

Final Report EUR 14546

Composite Mega Columns with multiple untied sections

Concrete sections reinforced by multiple encased rolled sections are a possible solution to realize mega columns of tall buildings. In comparison to concrete filled caissons, the advantages are less welding, less fabrication work, the use of simple splices well settled for decades in high-rise projects and possibility of simpler beam to column connections. All these characteristics, combined to the availability of huge rolled sections in steel which do not require pre-heating before welding, lead to another advantage: a high potential for reliable ductile behaviour.

Although codes and specifications do consider composite structural elements, they do not offer specific provisions on the design of composite sections with two or more encased steel sections. Following experimental campaigns and numerical validations, Simplified design approaches are proposed and described in this report in accordance with three codes: European, American and Chinese.

CTBUH Research: Composite Mega Columns Made of Multiple Rolled Sections Untied Between the Floors

• short version
• full version

Fire resistance of long span cellular beam made of rolled profiles (FICEB)

The aim of this project is to develop uniform European design rules for protected and unprotected cellular beams (CB) constructed of rolled sections subjected to fire. The use of cellular beams (CB) will be increased by minimising and optimising the cost of fire protection and by allowing a wider use of unprotected CB. This will greatly benefit long span construction, and increase the market share of steel. These results will be achieved based on the development of a new design code of single CB subjected to fire as well as an extended methodology considering the whole floor structure and the beneficial effects of the adjacent members. The reliability of the developed tools will be based on large-scale tests in order to provide a cost-effective design methodology. A set of practical design recommendations will be developed in order to satisfy all the requirements of fire-safe engineering.

Final report EUR 25122, 2012

Fire safety of Industrial Halls

Valorisation project

In the scope of this project, it is clearly demonstrated that steel structure, if designed appropriately, fulfils the safety requirements in case of fire which will be given in terms of "non-progressive collapse" and "non dangerous failure type". On the basis of a series of parametric studies, several simple design rules as well as some key construction details are proposed in order to help all engineers to design safe steel structures for single storey industrial buildings.

Final report EUR 24222, 2010

The design guides:

Background documentation
Design guide

 

are accompanied by software LUCA available in the Download Center.

Development of design rules for the behavior of external steel structures

The aims of the present research are to improve and to extend the existing physical models, in order to calculate temperature development within various types of structural elements, by including transient state effects. The verification of the current Eurocode models has been performed on the basis of experimental and numerical results.

Final Report EUR 22570, 2006.

Fire Safety of Industrial Halls and Low-rise Buildings:

Realistic Fire Design, Active Safety Measures, Post-local  failure simulation and Performance Based Requirements”

The primary aim of this research was to prove that the fire safety of steel single-storey buildings is sufficient, in the absence of passive fire protection, by means of risk assessment and structural simulations showing that the safety of people and firemen is ensured. The safety of firemen is guaranteed by a safe failure mode and non-progressive collapse behaviour of the structure. This methodology was also extended to low level multi-storey structures (two to four storeys).

Final Report EUR 22568; 2006

Natural Fire safety concept

The development and validation of a CFD-based engineering methodology for evaluating thermal action on steel and composite structures

A CFD-based engineering methodology has been developed for determining the thermal behaviour of structural elements in steel/composite-framed buildings subjected to natural fires.

Final Report EUR 21444, 2005.

Dissemination of Fire Safety Engineering Knowledge

Final Report EUR 23332, 2005.

Calculation rules of lightweight steel sections in fire situation

Final Report EUR 21426, 2004.

Risk-Based Fire Resistance Requirements

Final Report EUR 21443, 2004.

Natural Fire Safety Concept 

Full Scale Tests, Implementation in the Eurocodes and Development of a User-friendly Design Tool

Final Report EUR 20580, 2003.

Demonstration of real fire tests in car parks and high buildings

Final Report EUR 20466, 2002.

Competitive Steel Building through Natural Fire Safety Concept

Essentials of the Final Report EUR 20360 EN, 2002.

English version, Final Report EUR 20360
French version / C.E.C. Research 7215-PP/042
Italian version / C.E.C. Research 7215-PP/042
Spanish version / C.E.C. Research 7215-PP/042
Dutch version / C.E.C. Research 7215-PP/057
German version / C.E.C. Research 7215-PP/057

Natural Fire Safety Concept

Valorisation project

Final Report EUR 20349, 2002

Design recommendations for composite steel framed buildings in fire

CEC Agreement 7210-PA, PB, PC, PD-112; Final Report, 2002.

Design tools for the behavior of multi-storey steel framed buildings exposed to natural fire conditions

Final Report EUR 20953, 2002.

Development of design rules for steel structures subjected to natural fires in CLOSED CAR PARKS

Final Report EUR 18867, 1997.

Development of design rules for steel structures subjected to natural fires in LARGE COMPARTMENTS

Final Report EUR 18868, 1997.

Buckling Curves in Case of Fire

Part I (Main Text) and Part II (Annexes)

Final Report EUR 18380, 1996.

REFAO-III

Practical Design Tools for Unprotected Steel Columns Submitted to ISO-Fire

Final Report Eur 14348, 1992

REFAO-II

Practical Design Tools for Composite Steel Concrete Construction Elements Submitted to ISO-FIRE considering the Interaction Between Axial Load N and Bending Moment M

Final Report EUR 13309, 1991

Computer assisted Analysis of the Fire Resistance of Steel and Composite  Concrete-Steel  Structures

Final Report EUR 10828, 1987

Innovative design of composite bridges for medium spans based on rolled sections

Currently on the market available sections made out of fine-grain thermomechanically rolled (TM) and quenched self-tempered (QST) steel (HISTAR^®) become more and more an economical and attractive alternative to frequently used welded plate girders in bridge design. Unfortunately the range of span lengths is limited to small and medium bridges – up to about 40-45 m, due to the limited depth of rolled sections. 

The report of the R&D study “Innovative design of composite bridges for medium spans based on rolled sections” shows options, how to increase the maximum span lengths of composite bridges with hot-rolled sections. A detailed study on a subsequently built bridge for the city of Olsztyn in Poland was carried out and it could be shown that span lengths up to 55 m could be achieved by using HL1100 profiles in HISTAR^®460.

Report and design recommendations

"SBRI" Sustainable Steel-Composite Bridges in Built Environment

In the worldwide infrastructure network especially bridges are of essential importance. The request for sustainable structures is urgent as for bridges lifecycle design is intended to cover a span of more than 100 years. Shifting from an initial cost-effective mode to a lifecycle cost-effective mode seems to be demanding in regard of increasing maintenance, rehabilitation and renewal of bridges also in view of the rapid growing traffic volume on bridges. Within the European funded research project “Sustainable Steel-Composite Bridges in Built Environment” (SBRI) a holistic approach is applied by combining environmental, social and economic indicators. The obtained results provide a basis for the development of European recommendations for the design of sustainable bridges.

Final report EUR 26322
handbook: introduction of a fully integrated lifecycle model integrating environmental, economic and functional aspects and illustrated by a case study.
User-friendly software tool which enables the combined analysis of Lifecycle Assessment (LCA), Lifecycle Costs (LCC) and Lifecycle Performance (LCP) of different bridge case studies and the comparative analysis between alternative solutions.	Multilingual

"INTAB" Economic and durable design of composite bridges with integral abutments

In the design and construction of bridges, questions of sustainability, maintenance and durability are becoming more and more important for European road administrations, in addition to safety and serviceability issues. Therefore integral abutment bridges are becoming highly attractive to designers, constructors and road administrations, as they tend to be less expensive to build, easier to maintain and more economical to own over their life time. Bearings and joints are main sources of maintenance costs during a lifetime. These costs vanish because the bridges are joint- and bearing-free. However, this very advantage complicates the design compared to conventional bridges in some crucial respects. Combined with the fact that most European countries have only limited experience with integral bridges to date, this leads to a reluctance of road administrations to use this bridge type. Thus the main objective of the project is to experimentally and theoretically investigate the behaviour of critical points of integral abutment bridges. Regarding the soil-structure interaction, recommendations are elaborated based on monitoring results as well as previous research and monitoring campaigns. Conventional HP piles and sheet piles are investigated as a foundation. Furthermore a hinged HP connection is developed to decrease the stresses in the pile system. An investigation of the design and construction of the slab to pavement approach is also carried out to avoid major damages to the structure. Finally the most important information is condensed into the essential features in form of a 'Design guide for composite bridges with integral abutments'.

Final report EUR 24224
Design Guides

Bridges are an integral part of the worldwide traffic infrastructure and long-span bridges especially contribute to mobility and economy of time in travelling. Improvements of the steel-plated cross-sections of steel and composite bridge structures help to enhance the competitiveness of such bridges. 

Herein the aims are the valorisation and dissemination of the knowledge and results which have been acquired within the preceding RFCS research project 'Competitive steel and composite bridges by improved steel plated structures Combri' for practitioners with regard to plate buckling verifications. 

The outcome is the Combri design manual consisting of two parts which provide clearly arranged and concise documents for daily use.

Part I 'Application of Eurocode rules' covers two composite bridge structures - a twin-girder and a box-girder bridge-on the basis of worked examples for which the knowledge is written down in a descriptive manner and references are given to current Eurocode rules.
Part II 'State-of-the-art and conceptual design of steel and composite bridges' presents the current practice in several European countries and common bridge types as well as unusual bridges for special purposes or development projects. Improvements which can be provided to the design of steel and composite bridges are discussed and the possibilities and restrictions given by the current Eurocode rules are highlighted. In this report, proposals are also formulated to implement the newly gained state-of-the-art knowledge into standardisation via nationally determined parameters (NDP), non-contradictory complementary information (NCCI) and suggestions for the next revision of the Eurocodes .

"PrECO-Beam" Prefabricated Enduring Composite Beams based on Innovative Shear Transmission

Composite structures are gaining in importance due to the economic and versatile application. A new form of shear transmission — the composite dowel — permits composite girders without an upper steel flange and with enduring shear connection. The composite dowel is produced by cutting a rolled beam with a determined cutting-line into two parts. Due to the high degree of automation and of prefabrication shorter construction times and less amount of work are possible. However, few experiences with continuous shear connectors have been gained so far. In the frame of the project ‘Prefabricated Enduring Composite Beams based on Innovative Shear Transmission’ the economic efficiency of these composite girders — Preco-Beams — has been evaluated.

Final Report EUR 25321

Composite Bridge Design for Small and medium Spans

In the frame of this project, new concepts for the design of easily buildable composite bridges have been developed wich are attractive for being executed by the main contractor without problems on site. The composite bridge concepts being developed cover the span range of about 15 to 50 m, to extend the traditional span lengths of composite bridges for small and medium spans. Therefore, the new concepts cover about 75% of all span requirements for road bridges. Particular features of these new concepts are the sufficient robustness for execution, cost effectiveness, durability in use and a minimum of construction time.

Final Report EUR 20583

Steel Buildings in Europe (SBE)

The present Design Manual consists in a series of technical guides in order to facilitate applications of the Eurocodes, for the design of steel buildings.

These design manual is helpful for steel fabricators and engineering offices. Some guides dealing with advantages of the use of steel will also apply to architects. These guides provide a strong source of knowledge for designers in accordance with Eurocodes.

These guides cover two types of buildings:

1. Multi-storey building (MSB)

Part 1: Architect’s guide
Part 2: Concept design
Part 3: Actions
Part 4: Detailed design
Part 5: Joint design
Part 6: Fire Engineering
Part 7: Model construction specification
Part 8: Description of member resistance calculator-> (Excel file)
Part 9: Description of simple connection resistance calculator -> (Excel file)
Part 10: Guidance to developers of software for the design of composite beams
All Parts (ZIP file)

2. Single storey building (SSB)

Part 1: Architect’s guide
Part 2: Concept design
Part 3: Actions
Part 4: Detailed design of portal frames
Part 5: Detailed design of trusses
Part 6: Detailed design of built up columns
Part 7: Fire engineering
Part 8: Building envelope
Part 9: Introduction to computer software
Part 10: Model construction specification
Part 11: Moment connections
All Parts (ZIP file)

Design guide BATIRSUR

The French law "Risque" No. 2003-699 of 30 July 2003 on prevention of technological and natural risks and repairing damage has created a new approach of control of the urban development around hazard installations: the Risk Preventions Plans Technology (PPRT). Their goal is to limit the risk exposure of population. To do this, the PPRTs Regulation can establish among others- constructive action on the frame, in the form of regulations or recommendations.

Recent studies (application of technical specifications supplement the effects of overpressure, 2008) showed the potential vulnerability of steel buildings of industrial use, built according to  classic engineering construction rules and respecting the DTU Snow and wind, and situated in the area of a hazard technological overpressure (even low-intensity 20-50 mbar).

Improving the protection of persons located inside such buildings involves therefore determining specific constructive provisions for future construction. Moreover, they must take into account concerns technical and economic and be conceived with an efficiency / cost ratio efficient than enables not, most of the time, a design taking into account only the level of overpressure and performed according to standard techniques consultants. To respond to this dual problem this guide has been imagined as part of the research project BATIRSUR.

The project, with experimental and theoretical components, has allowed to develop, validate and apply precise calculation tools taking into account the influence of various parameters of steel buildings for industrial use (in the structures of elements) and the load (at the level of the signal applying pressure on the structure).

The BATIRSUR design guide is intended for construction professionals, contractors and project managers. It offers design rules associated with constructive recommendations for the realization of new single storey steel buildings meeting the PPTRs performance targets for overpressure zone 20-50 mbar.

The guide provides a modular methodology based on simplified calculation tools that enable engineers to quickly and easily assess the risk of failure of the steel structure against the pressure hazard. With easy design and an optimized design, it meets the economic requirements of professionals.

Design Guide
Example

Eurobuild in Steel

This European research project was concerned with identifying the factors which will influence the next generation of building design and in developing opportunities for steel-intensive products and systems.

Three market sectors were studied:

commercial buildings
industrial buildings
residential buildings

 

which are different in character and in potential market share for steel. The work has been carried out in the participating countries in order to identify differences in market perception and opportunities across Europe. A set of documents were elaborated in order to help steel customers with their design. Furthermore a database with relevant info was created. 

Further information in the official site www.eurobuild-in-steel.com

Market survey within Europe on Standardised Solutions for Steel in Low-rise Buildings

The present report resumes the results of the market survey done by the authors during the years 2001 to 2004. The scope of the survey has been defined thanks to main keywords "low-rise buildings" and "standardised steel solutions". This work identifies, as far as possible, the existing available solutions within the European market.

Final report, Conan Y., Cajot L.g.;December 2003, PRF report 136/04.